Overall requirements:

1. Type: The belt is used as the conveyor line, and there are 5 glue spraying heads built in, which can spray glue in straight line and wave shape.

2. Length: about 5000mm.

3. Width: The belt width is about 2200mm.

4. Height: total about 1800mm.

5. Single sheet glue spraying time (including feeding and discharging): ≤15S.

6. Configure Robatech 30L hot melt glue machine.

Structural requirements:

1. The 400w geared motor is used as the belt drive to move smoothly. The frame is welded with high-quality 40*80 rectangular steel, and the glue-spraying transmission part is protected by a sealing plate.

2. Use high-quality silicone non-stick belt with guiding ribs.

3. Centralized control in the main control box.

http://www.mattressrobot.com/